What questions should be kept in mind when installing guide boots for elevator parts?

What questions should be kept in mind when installing guide boots for elevator parts?

The guide shoe is a sliding guide device between the guide rail and the car or the counterweight of the elevator component. The elevator component can stabilize the car or the counterweight on the guide rail so that it can only move up and down to prevent the car or the counterweight from deflecting or swinging during operation. The upper part of guide shoe can also be filled with oil cup to reduce the friction between boot lining and guide rail.

Elevator parts guide boots are composed of boot lining, guide boot body, guide boot seat, etc. Elevator parts can be divided into two series: rolling guide boots and sliding guide boots. Sliding guide boots are also divided into fixed slide guide boots and elastic slide guide boots, which are generally elevator parts suitable for medium, high and low speed elevators.

Guide shoe installation shall meet the following requirements:

A. After the upper and lower guide boots are installed in place, they should be on the same vertical line, and skew and skew are not allowed. Make sure that the upper and lower guide boots are aligned with the center of the safety clamp;

B. Fixed guide boots are mainly used for freight elevators. The gap between two sides should be the same, and the gap between lining and top surface of track should be 0.5-2mm.